Index to Volume LVII
Index to Volume LVII
2023 Author Index*
AGHAZADA, H., CAMPOBASSO, A., ANNARUMMA, F., and BATTISTA, G., Design and Manufacturing of a Fully Digital Boneborne Palatal Expander, 585
ALBERTINI, P., ALBERTINI, E., ZUCCHINI, L., GRANDI, L., and LOMBARDO, L., Indirect Rebonding Transfer Tray Following Magnetic Resonance Imaging, 359
ALEV, Y., An Effective and Precise Method of Boneborne Maxillary Expansion, 291
ANNARUMMA, F., BATTISTA, G., AGHAZADA, H., and CAMPOBASSO, A., Design and Manufacturing of a Fully Digital Boneborne Palatal Expander, 585
ANTHONY, R. and JARKOWSKI, A., Indications and Mechanics for First-Molar Extractions, October**
ARREGHINI, A., PALONE, M., MAINO, B.G., PAOLETTO, E., and LOMBARDO, L., A Digitally Planned Tandem Skeletal Expander and Hybrid Aligner Approach, 32
ARVEDA, N., COLONNA, A., SICILIANI, G., and LOMBARDO, L., Class III Correction Using Clear Aligners, Sectional Wires, and Miniscrew Anchorage, 54
ARVEDA, N., CREMONINI, F., PALONE, M., DERTON, N., and LOMBARDO, L., Skeletal Anchorage for Strategic Treatment of Hyperdivergent Class III Malocclusion in Adult Patients, 522
AUSTIN, A.P., GREENE, T., and ROBERSON, G., Anterior Repositioning Appliance for Relief of TMD in Conjunction with Definitive Orthodontic Treatment, 683
AZAMI, N., URIBE, F., SAFAVI, K.E., and BASHIR, R., A Biological Orthodontic Approach for Multiple Missing Teeth: Tooth Substitutions and Autotransplantation, 436
AZAROUAL, M.F., NEANI, H., and ZAOUI, F., Early Management of an Edge-to-Edge Incisor Occlusion, June**
BAIK, U.B., KIM, Y.J., AN, J.S., LUK, H.S., and VAID, N.R., Molar Protraction Tube with Multiple Hooks, 187
BASHIR, R., AZAMI, N., URIBE, F., and SAFAVI, K.E., A Biological Orthodontic Approach for Multiple Missing Teeth: Tooth Substitutions and Autotransplantation, 436
BATTISTA, G., AGHAZADA, H., CAMPOBASSO, A., and ANNARUMMA, F., Design and Manufacturing of a Fully Digital Boneborne Palatal Expander, 585
BERETTA, M. and CANOVA, F.F., Noncompliance Treatment of Class II Patients Using a Modified Twin Block, 156
BISTER, D. and SHARARA, S., Anterior Open-Bite Treatment Using Palatal Temporary Anchorage Devices and a Double Transpalatal Arch, 418
BONEBREAK-JACKSON, C. and WALDMAN, A., Introduction to LightForce, Part 2: Treatment Planning and Clinical Management, 594
BONEBREAK-JACKSON, C., WALDMAN, A., and MOSHIRI, M., Introduction to LightForce, Part 1: 3D-Printing the Next Generation of Fixed Appliances, 500
BOWMAN, S.J., WILMES, B., KRAVITZ, N.D., and MILLER, S., Hybrid Aligner Treatment, 9
BUONOCORE, G., Clear Aligner Therapy in Children: Case Reports of Phase I Treatment, 87
BUPALI, N.R., GUPTA, A., and SHARMA, R., A Mini-Implant-Supported Canine Cantilever Spring, 479
CAMPOBASSO, A., ANNARUMMA, F., BATTISTA, G., and AGHAZADA, H., Design and Manufacturing of a Fully Digital Boneborne Palatal Expander, 585
CANOVA, F.F. and BERETTA, M., Noncompliance Treatment of Class II Patients Using a Modified Twin Block, 156
CAPUOZZO, R., FELICE, M.E., CARUSO, S., GATTO, R., and CARUSO, S., Upper Canine Extrusion Using Temporary Anchorage Devices and Clear Aligners, 63
CARLETTI, P., LUZI, C., and SZABÒ, E., CAD/CAM Sheath for Attaching a Cantilever Spring to a Metal-Printed Rapid Palatal Expander, 119
CARLUCCI, A., LOMBARDO, L., BARBARA, L., CREMONINI, F., and PALONE, M., Treatment of Skeletal Class III Malocclusion in Adolescents Using Miniscrew-Supported Orthopedic and Fixed Orthodontic Appliances, 735
CARON, E., KADER, E., RETROUVEY, J.M., and SADHAK, N.D., 3D Metal-Printed Retainers, 149
CESCHI, M., CONTARDO, L., RIATTI, R., and POZZAN, L., The iMolar System and Clear Aligners in Adult Class II Patients, 45
CHOI, J.Y., CHUNG, K.R., NELSON, G., and KIM, S.H., A Modified C-Implant for Simpler and More Efficient Treatment, 469
CHOI, S., LEE, K.C., and YOON, T.R., In-Office Fabrication of Palatal Expanders Using 3D-Printed Resin Blocks, 446
CHUNG, K.R., NELSON, G., KIM, S.H., and CHOI, J.Y., A Modified C-Implant for Simpler and More Efficient Treatment, 469
COLONNA, A., SICILIANI, G., LOMBARDO, L., and ARVEDA, N., Class III Correction Using Clear Aligners, Sectional Wires, and Miniscrew Anchorage, 54
CONTARDO, L., RIATTI, R., POZZAN, L., and CESCHI, M., The iMolar System and Clear Aligners in Adult Class II Patients, 45
COUSLEY, R.R.J., Orthodontic Aligner Software for the Design of Mini-Implant Guidance Stents, 212
COZZANI, M., MIGLIORATI, M., MANNI, A., and SCOLARO, A., Space Closure with Single Miniscrews in Patients with Upper Lateral-Incisor Agenesis, February**
CREMONINI, F., PALONE, M., VIANELLO, M., GUIDUCCI, D., and LOMBARDO, L., Two-Phase Treatment of a Class III with Severe Anterior Open Bite and Hyperdivergent Growth Pattern: A Digital Workflow Option, 169
DASSATTI, L., PAPI, G., MIGLIORATI, M., and GIUNTOLI, F., Management of a Transmigrant Lower Canine without Skeletal Anchorage in a Growing Class II Patient, 537
DERTON, N., CREMONINI, F., ARVEDA, N., LOMBARDO, L., and PALONE, M., Classification of Temporary Anchorage Devices in Orthodontics, 353
DITMAROV, A. and SENYUK, A., Extraction of a Lower Incisor for Orthodontic Decompensation of a Skeletal Class II Deformity, 724
EL TANANY, R., NASSIF, M.S., and EL-KORASHY, D.I., Effects of Icon Treatment and Bleaching on the Color of Enamel with Induced White-Spot Lesions, 298
EL-BEIALY, A.R., SALAMA, O.A., MOSTAFA, Y.A., and NASRALLAH, T., Forced Extrusion of an Endodontically Treated Lower Incisor Prior to Extraction, 459
EL-KORASHY, D.I., EL TANANY, R., and NASSIF, M.S., Effects of Icon Treatment and Bleaching on the Color of Enamel with Induced White-Spot Lesions, 298
FARRET, M., Treatment of an Accentuated Gummy Smile with Skeletally Anchored Orthodontic Intrusion, 615
FAWAZ, P., HUSSEINI, B., CHEBEL, F.B., KMEID, R., and VANNET, B.V., A Multidisciplinary Approach to Treatment of Multiple-Tooth Agenesis, Retention, and Impaction, December**
FREER, E., GIULIERI, C., and WEIR, T., Use of 3D Metrology Software to Analyze Aligner Treatment Outcomes after Lower-Incisor Extractions, 747
GARVAN, C.S., YANG, J., WHEELER, T.T., and WALDMAN, A., Clinical Efficiency of LightForce 3D-Printed Custom Brackets, 274
GIULIERI, C., WEIR, T., and FREER, E., Use of 3D Metrology Software to Analyze Aligner Treatment Outcomes after Lower-Incisor Extractions, 747
GIUNTOLI, F., DASSATTI, L., PAPI, G., and MIGLIORATI, M., Management of a Transmigrant Lower Canine without Skeletal Anchorage in a Growing Class II Patient, 537
GORCZYCA, A.M., Ask Ann Marie: How Do You Approach the Interview Process for Hiring a New Team Member? 192
GORCZYCA, A.M., Ask Ann Marie: Motivating Staff, 532
GORCZYCA, A.M., Leadership: Action, 336
GRAF, S. and KIM, K.B., Direct Printing of Clear Aligners, 450
GREENE, T., ROBERSON, G., and AUSTIN, A.P., Anterior Repositioning Appliance for Relief of TMD in Conjunction with Definitive Orthodontic Treatment, 683
GROTH, C. and KRAVITZ, N.D., Direct 3D-Printed Occlusal Splints, 640
GUPTA, A., SHARMA, R., and BUPALI, N.R., A Mini-Implant-Supported Canine Cantilever Spring, 479
HIGSON, M., WU, E.C., and MAH, J.K., Effect of the Herbst Appliance on Various Class II Malocclusions, 180
JARKOWSKI, A. and ANTHONY, R., Indications and Mechanics for First-Molar Extractions, October**
JAROSZ, K.F., Open-Coil Activation of Impacted Canines, 625
JAYARAMAN, S., NOBLE, J., and KRAVITZ, N.D., Numb Chin Syndrome, 760
KADER, E., RETROUVEY, J.M., SADHAK, N.D., and CARON, E., 3D Metal-Printed Retainers, 149
KIM, H.J. and PARK, H.S., The Potential for Regeneration of Mandibular Lingual Cortical Bone after En Masse Molar Distalization, 512
KIM, K.B. and GRAF, S., Direct Printing of Clear Aligners, 450
KIM, S.H., CHOI, J.Y., CHUNG, K.R., and NELSON, G., A Modified C-Implant for Simpler and More Efficient Treatment, 469
KRAVITZ, N.D. and GROTH, C., Direct 3D-Printed Occlusal Splints, 640
KRAVITZ, N.D., JAYARAMAN, S., and NOBLE, J., Numb Chin Syndrome, 760
KRAVITZ, N.D., MILLER, S., BOWMAN, S.J., and WILMES, B., Hybrid Aligner Treatment, 9
KRAVITZ, N.D., VOGELS, D.S. III, and VOGELS, P.B., 2023 JCO Orthodontic Practice Study, 567, 645, 709
KUMAR, M., GOYAL, M., AGARWAL, Y., MISHRA, S., and BOHARA, P., Orthodontic Management of a Case with Linear Morphea, August**
KUMAR, M., GOYAL, M., KAUR, A., JAIN, A.D., and MAHESHWARI, A., Orthodontic Management after Unilateral Extraction of a Compound Odontoma and an Impacted Canine, 101
LAU, B., Central-Incisor Substitution for Management of an Impacted Upper Canine, 327
LEE, K.C., YOON, T.R., and CHOI, S., In-Office Fabrication of Palatal Expanders Using 3D-Printed Resin Blocks, 446
LIN, J.C.Y., CHEN, S., TSAI, S.J., CHANG, S., and BOWMAN, S.J., Treatment of Complex Interdisciplinary Cases Using a Hybrid Aligner Approach, 16
LOMBARDO, L., ARVEDA, N., COLONNA, A., and SICILIANI, G., Class III Correction Using Clear Aligners, Sectional Wires, and Miniscrew Anchorage, 54
LUDWIG, B., MURA, R., LEONARDO, B., CONTARDO, L., and GLOCKENGIESSER, J., Controlled Slicing for Space Closure in Cases with Congenitally Missing Second Premolars, 220
LUDWIG, B., VAID, N.R., VENUGOPAL, A., and MANZANO, P., Nonsurgical Management of a Severe Atypical Class II Using Miniscrew Anchorage, Transpalatal Arch, and Intrusion Arch, 237
LUZI, C., SZABÒ, E., and CARLETTI, P., CAD/CAM Sheath for Attaching a Cantilever Spring to a Metal-Printed Rapid Palatal Expander, 119
MAH, J.K., HIGSON, M., and WU, E.C., Effect of the Herbst Appliance on Various Class II Malocclusions, 180
MALDONADO MOLINA, O.A., Orthodontics and Dental Implants in the Esthetic Zone, 411
MANIKANDAN, J., PAWAR, R., GANIGER, C., PHAPHE, S., and RONAD, Y.A., Effect of Low-Level Laser Therapy on the Distalization of Maxillary Canines in Adolescents, 389
MANNI, A., CAMPOBASSO, A., ANNARUMMA, F., ARNÒ, F., and BATTISTA, G., Fully Digital Design and Fabrication of a Telescoping Herbst Appliance, 318
MANNI, A., SCOLARO, A., COZZANI, M., and MIGLIORATI, M., Space Closure with Single Miniscrews in Patients with Upper Lateral-Incisor Agenesis, February**
MANZANO, P., LUDWIG, B., VAID, N.R., and VENUGOPAL, A., Nonsurgical Management of a Severe Atypical Class II Using Miniscrew Anchorage, Transpalatal Arch, and Intrusion Arch, 237
MEULI, S., BRUGNAMI, F., MARROCCO, S., ORSINI, R., and SCOPELLITI, D., Invisalign Treatment with Periodontally Accelerated Osteogenic Orthodontics and Orthognathic Surgery, 264
MIGLIORATI, M., GIUNTOLI, F., DASSATTI, L., and PAPI, G., Management of a Transmigrant Lower Canine without Skeletal Anchorage in a Growing Class II Patient, 537
MIGLIORATI, M., MANNI, A., SCOLARO, A., and COZZANI, M., Space Closure with Single Miniscrews in Patients with Upper Lateral-Incisor Agenesis, February**
MILLER, S., BOWMAN, S.J., WILMES, B., and KRAVITZ, N.D., Hybrid Aligner Treatment, 9
MOSHIRI, M., BONEBREAK-JACKSON, C., and WALDMAN, A., Introduction to LightForce, Part 1: 3D-Printing the Next Generation of Fixed Appliances, 500
MOSTAFA, Y.A., NASRALLAH, T., EL-BEIALY, A.R., and SALAMA, O.A., Forced Extrusion of an Endodontically Treated Lower Incisor Prior to Extraction, 459
MULLEN, R., Uprighting Mandibular Second Molars with Twin Brackets, 121
MUMTAZ, B., A Modified Bracket Position for a Rotated Tooth, 644
MUMTAZ, B., Lingual Step-In Bend for Use with Piggyback Mechanics, 248
NASRALLAH, T., EL-BEIALY, A.R., SALAMA, O.A., and MOSTAFA, Y.A., Forced Extrusion of an Endodontically Treated Lower Incisor Prior to Extraction, 459
NASSIF, M.S., EL-KORASHY, D.I., and EL TANANY, R., Effects of Icon Treatment and Bleaching on the Color of Enamel with Induced White-Spot Lesions, 298
NEANI, H., ZAOUI, F., and AZAROUAL, M.F., Early Management of an Edge-to-Edge Incisor Occlusion, June**
NELSON, G., KIM, S.H., CHOI, J.Y., and CHUNG, K.R., A Modified C-Implant for Simpler and More Efficient Treatment, 469
NEVINS, A., Ask an Expert: Yes, and . . . , 283
NOBLE, J., KRAVITZ, N.D., and JAYARAMAN, S., Numb Chin Syndrome, 760
OKUHASHI, S., PAPADEMETRIOU, M., TAI, K., and PARK, J.H., Anchor-Lock System Double-Y for Post-SARPE Retention and Simultaneous Molar Distalization, 110
PALONE, M., PAVAN, F., ROMAGNOLO, G., CREMONINI, F., and LOMBARDO, L., Skeletally Anchored Running-Loop Technique for Mandibular First-Molar Uprighting, 287
PAPADEMETRIOU, M., TAI, K., PARK, J.H., and OKUHASHI, S., Anchor-Lock System Double-Y for Post-SARPE Retention and Simultaneous Molar Distalization, 110
PAPI, G., MIGLIORATI, M., GIUNTOLI, F., and DASSATTI, L., Management of a Transmigrant Lower Canine without Skeletal Anchorage in a Growing Class II Patient, 537
PARK, H.S. and KIM, H.J., The Potential for Regeneration of Mandibular Lingual Cortical Bone after En Masse Molar Distalization, 512
PARK, J.H., OKUHASHI, S., PAPADEMETRIOU, M., and TAI, K., Anchor-Lock System Double-Y for Post-SARPE Retention and Simultaneous Molar Distalization, 110
PARK, S. and SIM, M., Orthodontic Treatment Using Directly 3D-Printed Clear Aligners, 606
PARSAEI, Y. and STEINBACHER, D., Esthetic Optimization of Surgical-Orthodontic Treatment, 661
PITHON, M.M., REYES, A.A., MOTA-JÚNIOR, S.L., CASTILHOS, J.S., and TANAKA, O.M., Nonsurgical Treatment of Anterior Crossbite in a Cleft Lip and Palate Patient Using a Fan-Type Rapid Palatal Expander and Fixed Appliances, 397
POZZAN, L., CESCHI, M., CONTARDO, L., and RIATTI, R., The iMolar System and Clear Aligners in Adult Class II Patients, 45
RETROUVEY, J.M., SADHAK, N.D., CARON, E., and KADER, E., 3D Metal-Printed Retainers, 149
RIATTI, R., POZZAN, L., CESCHI, M., and CONTARDO, L., The iMolar System and Clear Aligners in Adult Class II Patients, 45
ROBERSON, G., AUSTIN, A.P., and GREENE, T., Anterior Repositioning Appliance for Relief of TMD in Conjunction with Definitive Orthodontic Treatment, 683
SADHAK, N.D., CARON, E., KADER, E., and RETROUVEY, J.M., 3D Metal-Printed Retainers, 149
SAFAVI, K.E., BASHIR, R., AZAMI, N., and URIBE, F., A Biological Orthodontic Approach for Multiple Missing Teeth: Tooth Substitutions and Autotransplantation, 436
SALAMA, O.A., MOSTAFA, Y.A., NASRALLAH, T., and EL-BEIALY, A.R., Forced Extrusion of an Endodontically Treated Lower Incisor Prior to Extraction, 459
SCOLARO, A., COZZANI, M., MIGLIORATI, M., and MANNI, A., Space Closure with Single Miniscrews in Patients with Upper Lateral-Incisor Agenesis, February**
SENYUK, A. and DITMAROV, A., Extraction of a Lower Incisor for Orthodontic Decompensation of a Skeletal Class II Deformity, 724
SHARARA, S. and BISTER, D., Anterior Open-Bite Treatment Using Palatal Temporary Anchorage Devices and a Double Transpalatal Arch, 418
SHARMA, R., BUPALI, N.R., and GUPTA, A., A Mini-Implant-Supported Canine Cantilever Spring, 479
SICILIANI, G., LOMBARDO, L., ARVEDA, N., and COLONNA, A., Class III Correction Using Clear Aligners, Sectional Wires, and Miniscrew Anchorage, 54
SIM, M. and PARK, S., Orthodontic Treatment Using Directly 3D-Printed Clear Aligners, 606
STEINBACHER, D. and PARSAEI, Y., Esthetic Optimization of Surgical-Orthodontic Treatment, 661
SZABÒ, E., CARLETTI, P., and LUZI, C., CAD/CAM Sheath for Attaching a Cantilever Spring to a Metal-Printed Rapid Palatal Expander, 119
TAEBI-HARANDY, M., MEHTA, S., WARREN, E., FELDMAN, J., and YADAV, S., Outcomes Associated with 3M Clarity Aligners, 344
TAI, K., PARK, J.H., OKUHASHI, S., and PAPADEMETRIOU, M., Anchor-Lock System Double-Y for Post-SARPE Retention and Simultaneous Molar Distalization, 110
URIBE, F., SAFAVI, K.E., BASHIR, R., and AZAMI, N., A Biological Orthodontic Approach for Multiple Missing Teeth: Tooth Substitutions and Autotransplantation, 436
VAID, N.R., VENUGOPAL, A., MANZANO, P., and LUDWIG, B., Nonsurgical Management of a Severe Atypical Class II Using Miniscrew Anchorage, Transpalatal Arch, and Intrusion Arch, 237
VALVERDE MONTALVA, S.H., Early Derotation of Palatally Impacted Canines, 759
VALVERDE MONTALVA, S.H., Selective Bracket Bonding for Correction of Mesial Rotations, 511
VALVERDE MONTALVA, S.H. and VALVERDE MONTALVA, H.R., Attaching an Elastomeric Chain to a Soldered Lingual Arch, 693
VENUGOPAL, A., MANZANO, P., LUDWIG, B., and VAID, N.R., Nonsurgical Management of a Severe Atypical Class II Using Miniscrew Anchorage, Transpalatal Arch, and Intrusion Arch, 237
VOGELS, D.S. III, Chicago Style, 126
VOGELS, D.S. III, VOGELS, P.B., and KRAVITZ, N.D., 2023 JCO Orthodontic Practice Study, 567, 645, 709
VOGELS, P.B., 2023 Eugene L. Gottlieb JCO Student of the Year: Dr. Bianca Lau, 232
WALDMAN, A. and BONEBREAK-JACKSON, C., Introduction to LightForce, Part 2: Treatment Planning and Clinical Management, 594
WALDMAN, A., GARVAN, C.S., YANG, J., and WHEELER, T.T., Clinical Efficiency of LightForce 3D-Printed Custom Brackets, 274
WALDMAN, A., MOSHIRI, M., and BONEBREAK-JACKSON, C., Introduction to LightForce, Part 1: 3D-Printing the Next Generation of Fixed Appliances, 500
WANGSRIMONGKOL, B., The Piston Elastic for Uprighting an Ectopic Molar, 407
WEIR, T., FREER, E., and GIULIERI, C., Use of 3D Metrology Software to Analyze Aligner Treatment Outcomes after Lower-Incisor Extractions, 747
WEISSHEIMER, A., LEE, R.J., PHAM, J., TONG, H., and REDMOND, W.R., Clinical Overview of InBrace Generation 2.0, 376
WHEELER, T.T., WALDMAN, A., GARVAN, C.S., and YANG, J., Clinical Efficiency of LightForce 3D-Printed Custom Brackets, 274
WILMES, B., KRAVITZ, N.D., MILLER, S., and BOWMAN, S.J., Hybrid Aligner Treatment, 9
WU, E.C., MAH, J.K., and HIGSON, M., Effect of the Herbst Appliance on Various Class II Malocclusions, 180
YANG, J., WHEELER, T.T., WALDMAN, A., and GARVAN, C.S., Clinical Efficiency of LightForce 3D-Printed Custom Brackets, 274
YOON, T.R., CHOI, S., and LEE, K.C., In-Office Fabrication of Palatal Expanders Using 3D-Printed Resin Blocks, 446
ZAOUI, F., AZAROUAL, M.F., and NEANI, H., Early Management of an Edge-to-Edge Incisor Occlusion, June**
2023 Subject Index
2023 Eugene L. Gottlieb JCO Student of the Year: Dr. Bianca Lau, 232
2023 JCO Orthodontic Practice Study, 567, 645, 709
3D Metal-Printed Retainers, 149
3D Metrology Software, Use of, to Analyze Aligner Treatment Outcomes after Lower-Incisor Extractions, 747
3D-Printed Clear Aligners, Directly, Orthodontic Treatment Using, 606
3D-Printed Custom Brackets, LightForce, Clinical Efficiency of, 274
3D-Printed Occlusal Splints, Direct, 640
3D-Printed Resin Blocks, In-Office Fabrication of Palatal Expanders Using, 446
3D-Printing the Next Generation of Fixed Appliances: Introduction to LightForce, Part 1, 500
Adult Class II Patients, The iMolar System and Clear Aligners in, 45
Agenesis, Multiple-Tooth, Retention, and Impaction, A Multidisciplinary Approach to Treatment of, December**
Agenesis, Upper Lateral-Incisor, Space Closure with Single Miniscrews in Patients with, February**
Aligner Approach, Hybrid, A Digitally Planned Tandem Skeletal Expander and, 32
Aligner Approach, Hybrid, Treatment of Complex Interdisciplinary Cases Using, 16
Aligner Software, Orthodontic, for the Design of Mini-Implant Guidance Stents, 212
Aligner Therapy, Clear, in Children: Case Reports of Phase I Treatment, 87
Aligner Treatment Outcomes after Lower-Incisor Extractions, Use of 3D Metrology Software to Analyze, 747
Aligners, 3M Clarity, Outcomes Associated with, 344
Aligners, Clear, Direct Printing of, 450
Aligners, Clear, Directly 3D-Printed, Orthodontic Treatment Using, 606
Aligners, Clear, in Adult Class II Patients, The iMolar System and, 45
Aligners, Clear, Sectional Wires, and Miniscrew Anchorage, Class III Correction Using, 54
Aligners, Clear, Upper Canine Extrusion Using Temporary Anchorage Devices and, 63
Anchor-Lock System Double-Y for Post-SARPE Retention and Simultaneous Molar Distalization, 110
Anchorage Devices, Temporary, Classification of, in Orthodontics, 353
Anchorage, Miniscrew, Class III Correction Using Clear Aligners, Sectional Wires, and, 54
Ask an Expert, 283
Attaching an Elastomeric Chain to a Soldered Lingual Arch, 693
Bleaching, Effects of Icon Treatment and, on the Color of Enamel with Induced White-Spot Lesions, 298
Bonding, Selective Bracket, for Correction of Mesial Rotations, 511
Boneborne Maxillary Expansion, An Effective and Precise Method of, 291
Boneborne Palatal Expander, Fully Digital, Design and Manufacturing of a, 585
Brackets, 3D-Printed Custom, LightForce, Clinical Efficiency of, 274
C-Implant, A Modified, for Simpler and More Efficient Treatment, 469
CAD/CAM Sheath for Attaching a Cantilever Spring to a Metal-Printed Rapid Palatal Expander, 119
Canine Cantilever Spring, A Mini-Implant-Supported, 479
Canine Extrusion, Upper, Using Temporary Anchorage Devices and Clear Aligners, 63
Canine, Impacted Upper, Central-Incisor Substitution for Management of an, 327
Canine, Impacted, Unilateral Extraction of a Compound Odontoma and an, Orthodontic Management after, 101
Canines, Distalization of Maxillary, in Adolescents, Effect of Low-Level Laser Therapy on the, 389
Canines, Impacted, Open-Coil Activation of, 625
Canines, Palatally Impacted, Early Derotation of, 759
Cantilever Spring, CAD/CAM Sheath for Attaching, to a Metal-Printed Rapid Palatal Expander, 119
Cantilever Spring, Canine, A Mini-Implant-Supported, 479
Case Report, 63, 101, 169, 237, 327, 397, 459, 537, 615, 683, 724, June**, August**, December**
Central-Incisor Substitution for Management of an Impacted Upper Canine, 327
Chicago Style, 126
Chin Syndrome, Numb, 760
Clarity Aligners, 3M, Outcomes Associated with, 344
Class II Deformity, Skeletal, Extraction of a Lower Incisor for Orthodontic Decompensation of a, 724
Class II Malocclusions, Various, Effect of the Herbst Appliance on, 180
Class II Patient, Growing, Management of a Transmigrant Lower Canine without Skeletal Anchorage in a, 537
Class II Patients, Adult, The iMolar System and Clear Aligners in, 45
Class II Patients, Noncompliance Treatment of, Using a Modified Twin Block, 156
Class III Correction Using Clear Aligners, Sectional Wires, and Miniscrew Anchorage, 54
Classification of Temporary Anchorage Devices in Orthodontics, 353
Clear Aligner Therapy in Children: Case Reports of Phase I Treatment, 87
Clear Aligners in Adult Class II Patients, The iMolar System and, 45
Clear Aligners, Direct Printing of, 450
Clear Aligners, Directly 3D-Printed, Orthodontic Treatment Using, 606
Clear Aligners, Sectional Wires, and Miniscrew Anchorage, Class III Correction Using, 54
Clear Aligners, Upper Canine Extrusion Using Temporary Anchorage Devices and, 63
Clinical Efficiency of LightForce 3D-Printed Custom Brackets, 274
Clinical Overview of InBrace Generation 2.0, 376
Controlled Slicing for Space Closure in Cases with Congenitally Missing Second Premolars, 220
Cutting Edge, The, 212
Dental Implants in the Esthetic Zone, Orthodontics and, 411
Derotation of Palatally Impacted Canines, Early, 759
Design and Manufacturing of a Fully Digital Boneborne Palatal Expander, 585
Digital Boneborne Palatal Expander, Fully, Design and Manufacturing of a, 585
Digital Design, Fully, and Fabrication of a Telescoping Herbst Appliance, 318
Digital Ortho Lab, 149, 446, 585
Digitally Planned Tandem Skeletal Expander and Hybrid Aligner Approach, A, 32
Direct 3D-Printed Occlusal Splints, 640
Direct Printing of Clear Aligners, 450
Distalization of Maxillary Canines in Adolescents, Effect of Low-Level Laser Therapy on the, 389
Distalization, Simultaneous Molar, and Anchor-Lock System Double-Y for Post-SARPE Retention, 110
Early Derotation of Palatally Impacted Canines, 759
Early Management of an Edge-to-Edge Incisor Occlusion, June**
Ectopic Molar, The Piston Elastic for Uprighting an, 407
Edge-to-Edge Incisor Occlusion, Early Management of an, June**
Effect of Low-Level Laser Therapy on the Distalization of Maxillary Canines in Adolescents, 389
Effect of the Herbst Appliance on Various Class II Malocclusions, 180
Effective and Precise Method of Boneborne Maxillary Expansion, An, 291
Effects of Icon Treatment and Bleaching on the Color of Enamel with Induced White-Spot Lesions, 298
Elastomeric Chain, Attaching an, to a Soldered Lingual Arch, 693
Endodontically Treated Lower Incisor, Forced Extrusion of an, Prior to Extraction, 459
Esthetic Optimization of Surgical-Orthodontic Treatment, 661
Expander, Fully Digital Boneborne Palatal, Design and Manufacturing of a, 585
Expander, Metal-Printed Rapid Palatal, CAD/CAM Sheath for Attaching a Cantilever Spring to a, 119
Expander, Tandem Skeletal, and Hybrid Aligner Approach, A Digitally Planned, 32
Expanders, Palatal, In-Office Fabrication of, Using 3D-Printed Resin Blocks, 446
Expansion, Boneborne Maxillary, An Effective and Precise Method of, 291
Extraction of a Compound Odontoma and an Impacted Canine, Unilateral, Orthodontic Management after, 101
Extraction of a Lower Incisor for Orthodontic Decompensation of a Skeletal Class II Deformity, 724
Extraction, Forced Extrusion of an Endodontically Treated Lower Incisor Prior to, 459
Extractions, First-Molar, Indications and Mechanics for, October**
Extractions, Lower-Incisor, Use of 3D Metrology Software to Analyze Aligner Treatment Outcomes after, 747
Extrusion, Forced, of an Endodontically Treated Lower Incisor Prior to Extraction, 459
Extrusion, Upper Canine, Using Temporary Anchorage Devices and Clear Aligners, 63
Forced Extrusion of an Endodontically Treated Lower Incisor Prior to Extraction, 459
Fully Digital Design and Fabrication of a Telescoping Herbst Appliance, 318
Gottlieb, Eugene L., 2023 JCO Student of the Year: Dr. Bianca Lau, 232
Guidance Stents, Mini-Implant, Orthodontic Aligner Software for the Design of, 212
Gummy Smile, Accentuated, Treatment of an, with Skeletally Anchored Orthodontic Intrusion, 615
Herbst Appliance, Effect of the, on Various Class II Malocclusions, 180
Herbst Appliance, Telescoping, Fully Digital Design and Fabrication of a, 318
Hiring a New Team Member, How Do You Approach the Interview Process for? 192
Hooks, Multiple, Molar Protraction Tube with, 187
How Do You Approach the Interview Process for Hiring a New Team Member? 192
Hybrid Aligner Approach, A Digitally Planned Tandem Skeletal Expander and, 32
Hybrid Aligner Approach, Treatment of Complex Interdisciplinary Cases Using, 16
Icon Treatment and Bleaching, Effects of, on the Color of Enamel with Induced White-Spot Lesions, 298
iMolar System and Clear Aligners in Adult Class II Patients, The, 45
Impacted Canine, Unilateral Extraction of a Compound Odontoma and an, Orthodontic Management after, 101
Impacted Canines, Open-Coil Activation of, 625
Impacted Canines, Palatally, Early Derotation of, 759
Impacted Upper Canine, Central-Incisor Substitution for Management of an, 327
Impaction, Retention, and Multiple-Tooth Agenesis, A Multidisciplinary Approach to Treatment of, December**
Implants, Dental, in the Esthetic Zone, Orthodontics and, 411
In-Office Fabrication of Palatal Expanders Using 3D-Printed Resin Blocks, 446
InBrace Generation 2.0, Clinical Overview of, 376
Incisor Agenesis, Upper Lateral-, Space Closure with Single Miniscrews in Patients with, February**
Incisor Occlusion, Edge-to-Edge, Early Management of an, June**
Incisor, Central-, Substitution for Management of an Impacted Upper Canine, 327
Incisor, Endodontically Treated Lower, Forced Extrusion of an, Prior to Extraction, 459
Incisor, Lower, Extraction of a, for Orthodontic Decompensation of a Skeletal Class II Deformity, 724
Indications and Mechanics for First-Molar Extractions, October**
Indirect Rebonding Transfer Tray Following Magnetic Resonance Imaging, 359
Interdisciplinary Cases, Complex, Treatment of, Using a Hybrid Aligner Approach, 16
Interview Process for Hiring a New Team Member, How Do You Approach the? 192
Introduction to LightForce, Part 1: 3D-Printing the Next Generation of Fixed Appliances, 500
Introduction to LightForce, Part 2: Treatment Planning and Clinical Management, 594
Intrusion, Skeletally Anchored Orthodontic, Treatment of an Accentuated Gummy Smile with, 615
Invisalign Treatment with Periodontally Accelerated Osteogenic Orthodontics and Orthognathic Surgery, 264
JCO Orthodontic Practice Study, 2023, 567, 645, 709
JCO Student of the Year, 2023 Eugene L. Gottlieb: Dr. Bianca Lau, 232
Laser Therapy, Low-Level, Effect of, on the Distalization of Maxillary Canines in Adolescents, 389
Lau, Dr. Bianca: 2023 Eugene L. Gottlieb JCO Student of the Year, 232
Leadership: Action, 336
LightForce 3D-Printed Custom Brackets, Clinical Efficiency of, 274
LightForce, Introduction to, Part 1: 3D-Printing the Next Generation of Fixed Appliances, 500
LightForce, Introduction to, Part 2: Treatment Planning and Clinical Management, 594
Linear Morphea, Orthodontic Management of a Case with, August**
Lingual Arch, Soldered, Attaching an Elastomeric Chain to a, 693
Lingual Step-In Bend for Use with Piggyback Mechanics, 248
Magnetic Resonance Imaging, Indirect Rebonding Transfer Tray Following, 359
Management & Marketing, 192, 283, 336, 532
Management of a Transmigrant Lower Canine without Skeletal Anchorage in a Growing Class II Patient, 537
Maxillary Expansion, Boneborne, An Effective and Precise Method of, 291
Mini-Implant Guidance Stents, Orthodontic Aligner Software for the Design of, 212
Mini-Implant-Supported Canine Cantilever Spring, A, 479
Miniscrew Anchorage, Class III Correction Using Clear Aligners, Sectional Wires, and, 54
Miniscrews, Single, Space Closure with, in Patients with Upper Lateral-Incisor Agenesis, February**
Modified Bracket Position for a Rotated Tooth, A, 644
Modified C-Implant for Simpler and More Efficient Treatment, A, 469
Molar Distalization, Simultaneous, and Anchor-Lock System Double-Y for Post-SARPE Retention, 110
Molar Extractions, First-, Indications and Mechanics for, October**
Molar Protraction Tube with Multiple Hooks, 187
Molar Uprighting, Mandibular First-, Skeletally Anchored Running-Loop Technique for, 287
Molar, Ectopic, The Piston Elastic for Uprighting an, 407
Molars, Mandibular Second, Uprighting with Twin Brackets, 121
Motivating Staff, 532
Multidisciplinary Approach to Treatment of Multiple-Tooth Agenesis, Retention, and Impaction, A, December**
Noncompliance Treatment of Class II Patients Using a Modified Twin Block, 156
Numb Chin Syndrome, 760
Occlusal Splints, Direct 3D-Printed, 640
Odontoma, Compound, and an Impacted Canine, Orthodontic Management after Unilateral Extraction of a, 101
Online Only, February**, June**, August**, October**, December**
Open-Coil Activation of Impacted Canines, 625
Orthodontic Aligner Software for the Design of Mini-Implant Guidance Stents, 212
Orthodontic Management after Unilateral Extraction of a Compound Odontoma and an Impacted Canine, 101
Orthodontic Management of a Case with Linear Morphea, August**
Orthodontic Treatment Using Directly 3D-Printed Clear Aligners, 606
Orthodontics and Dental Implants in the Esthetic Zone, 411
Outcomes Associated with 3M Clarity Aligners, 344
Palatal Expander, Fully Digital Boneborne, Design and Manufacturing of a, 585
Palatal Expander, Metal-Printed Rapid, CAD/CAM Sheath for Attaching a Cantilever Spring to a, 119
Palatal Expanders, In-Office Fabrication of, Using 3D-Printed Resin Blocks, 446
Pearls, 119, 121, 187, 248, 287, 359, 407, 479, 511, 625, 644, 693, 759
Phase I Treatment, Case Reports of: Clear Aligner Therapy in Children, 87
Piggyback Mechanics, Lingual Step-In Bend for Use with, 248
Piston Elastic for Uprighting an Ectopic Molar, The, 407
Practice Study, 2023 JCO Orthodontic, 567, 645, 709
Premolars, Second, Congenitally Missing, Controlled Slicing for Space Closure in Cases with, 220
Protraction Tube, Molar, with Multiple Hooks, 187
Rapid Palatal Expander, Metal-Printed, CAD/CAM Sheath for Attaching a Cantilever Spring to a, 119
Rebonding Transfer Tray, Indirect, Following Magnetic Resonance Imaging, 359
Resin Blocks, 3D-Printed, In-Office Fabrication of Palatal Expanders Using, 446
Retainers, 3D Metal-Printed, 149
Retention, Post-SARPE, and Simultaneous Molar Distalization, Anchor-Lock System Double-Y for, 110
Rotated Tooth, A Modified Bracket Position for a, 644
Rotations, Mesial, Selective Bracket Bonding for Correction of, 511
Running-Loop Technique, Skeletally Anchored, for Mandibular First-Molar Uprighting, 287
SARPE Retention, Post-, and Simultaneous Molar Distalization, Anchor-Lock System Double-Y for, 110
Sectional Wires, Clear Aligners, and Miniscrew Anchorage, Class III Correction Using, 54
Selective Bracket Bonding for Correction of Mesial Rotations, 511
Skeletal Anchorage in a Growing Class II Patient, Management of a Transmigrant Lower Canine without, 537
Skeletal Class II Deformity, Extraction of a Lower Incisor for Orthodontic Decompensation of a, 724
Skeletally Anchored Orthodontic Intrusion, Treatment of an Accentuated Gummy Smile with, 615
Skeletally Anchored Running-Loop Technique for Mandibular First-Molar Uprighting, 287
Slicing, Controlled, for Space Closure in Cases with Congenitally Missing Second Premolars, 220
Space Closure in Cases with Congenitally Missing Second Premolars, Controlled Slicing for, 220
Space Closure with Single Miniscrews in Patients with Upper Lateral-Incisor Agenesis, February**
Staff, Motivating, 532
Step-In Bend, Lingual, for Use with Piggyback Mechanics, 248
Student of the Year, JCO, 2023 Eugene L. Gottlieb: Dr. Bianca Lau, 232
Substitution, Central-Incisor, for Management of an Impacted Upper Canine, 327
Surgical-Orthodontic Treatment, Esthetic Optimization of, 661
Telescoping Herbst Appliance, Fully Digital Design and Fabrication of a, 318
Temporary Anchorage Devices and Clear Aligners, Upper Canine Extrusion Using, 63
Temporary Anchorage Devices in Orthodontics, Classification of, 353
Transfer Tray, Indirect Rebonding, Following Magnetic Resonance Imaging, 359
Transmigrant Lower Canine, Management of a, without Skeletal Anchorage in a Growing Class II Patient, 537
Treatment of an Accentuated Gummy Smile with Skeletally Anchored Orthodontic Intrusion, 615
Treatment of Complex Interdisciplinary Cases Using a Hybrid Aligner Approach, 16
Treatment Planning and Clinical Management: Introduction to LightForce, Part 2, 594
Twin Block, Modified, Noncompliance Treatment of Class II Patients Using a, 156
Twin Brackets, Uprighting Mandibular Second Molars with, 121
Upper Canine Extrusion Using Temporary Anchorage Devices and Clear Aligners, 63
Uprighting an Ectopic Molar, The Piston Elastic for, 407
Uprighting Mandibular Second Molars with Twin Brackets, 121
Uprighting, Mandibular First-Molar, Skeletally Anchored Running-Loop Technique for, 287
Use of 3D Metrology Software to Analyze Aligner Treatment Outcomes after Lower-Incisor Extractions, 747
White-Spot Lesions, Induced, Effects of Icon Treatment and Bleaching on the Color of Enamel with, 298
Yes, and . . . , 283
*Articles with five or more authors are listed under only the first author name because of space constraints.
**These articles or videos are available only through the JCO Online Archive at www.jco-online.com. They may be accessed through the online contents page of the issue listed.
January, pp. 1-76; February, pp. 77-136; March, pp. 137-196; April, pp. 197-256; May, pp. 257-308; June, pp. 309-368; July, pp. 369-428, August, pp. 429-488; September, pp. 489-556; October, pp. 557-632; November, pp. 633-700; December, pp. 701-776