Orthodontic Treatment Using Directly 3D-Printed Clear Aligners
Drs. Sim and Park show two patients with mild malocclusions to demonstrate the potential of directly printed clear aligners. Both digital light processing and liquid-crystal display 3D printers were used to produce aligners ranging in thickness from .2mm to .5mm.
This article can only be viewed by JCO subscribers. Subscribers should log in below. You can purchase a subscription to JCO for as little as $223 a year worldwide. You can also purchase access to the entire JCO archive for 1 or 30 days ($30 or $70), or for $10 just this article for one year.
Please log in to your account to proceed. If you do not have an account, please create one.
Need Help?
Dynamic verses Static IP
Please select whether you have a dynamic IP address or a static IP address. A dynamic IP address can change over time while a static IP will never change. You may need to contact your IT administrator to find this out. If you don't have access to this information, you should select the option that you are using a dynamic IP address.
Note: If you do select dynamic IP address, you must have cookies enabled for your browser.
