Search Results For: 'palace'
181.
Easy Fabrication of an Occlusal Deprogrammer
Volume 48 : Number 6 : Page 368 : Jun 2014
The value of a deprogramming appliance for recording accurate centric relation, especially in cases with TMD, is well established. Horizontal and vertical overlapping of the anterior teeth can promote...
182.
THE CUTTING EDGE
Cementation and Removal of 3D-Printed Expanders
Volume 55 : Number 9 : Page 571 : Sep 2021
Dr. Coleman introduces a device that is laser-sintered in the laboratory, based on a routine digital intraoral scan. This technique avoids the drawbacks of traditional banded expanders, which require orthodontic separators, and bonded expanders, which can encroach on the gingival margins and are hard to remove.
183.
THE EDITOR'S CORNER
2021 JCO Orthodontic Practice Study
Volume 55 : Number 10 : Page 589 : Oct 2021
Since its inception in 1981 (the year I graduated from dental school), the biennial JCO Orthodontic Practice Study has been among our most frequently cited regular features. I have presented the resul...
184.
PEARLS
Lingual Frenulectomy with a Diode Laser
Volume 56 : Number 1 : Page 59 : Jan 2022
Dr. Neal Kravitz illustrates a simple procedure for releasing a tongue tie with a Spectralase 980 (includes a video demonstration). The controversial role of tongue ties in relation to pediatric OSA is also discussed.
185.
THE EDITOR'S CORNER
Volume 57 : Number 5 : Page 263 : May 2023
The British Invasion was a cultural event of the mid-1960s, when rock-and-roll bands like the Beatles, the Rolling Stones, and the Who became wildly popular in the United States. Teenagers were sent ...
186.
THE EDITOR'S CORNER
Volume 57 : Number 7 : Page 375 : Jul 2023
Ankyloglossia, otherwise known as “tongue tie” (TT), is an innate condition in which a short lingual frenulum restricts the tongue’s normal range of motion. The corrective procedure for a TT is a ling...
187.
JCO INTERVIEWS
Dr. Marco Rosa on Dental Agenesis and Dentofacial Esthetics
Volume 59 : Number 1 : Page 9 : Jan 2025
In this interview with Dr. James Noble, the world expert on missing lateral incisors gives his best advice for performing canine substitutions, optimizing gingival esthetics and improving soft-tissue management in daily practice, and managing common clinical situations.
188.
A Combined Fixed-Removable Approach to the Treatment of Impacted Maxillary Canines
Volume 9 : Number 3 : Page 162 : Mar 1975
There was a time in Europe when it was generally considered that all orthodontic movements could be effected by removable appliances alone. With the evolution of multibanded techniques, it has been sh...
189.
JCO Interviews Dr. Robert M. Ricketts on Early Treatment, Part 1
Volume 13 : Number 1 : Page 23 : Jan 1979
DR. BRANDT What should the term "early treatment" mean to practicing orthodontists?DR. RICKETTS Well, Sid, first let me thank you for the opportunity to talk to your readers again and especially to di...
190.
Positive lntermaxillary Pressure Appliance
Volume 19 : Number 8 : Page 579 : Aug 1985
I have designed a functional appliance specifically to correct and control the skeletal and dental problems related to excessive vertical growth of the mandible, or "long face syndrome".1-3 Few applia...
191.
Volume 26 : Number 4 : Page 0 : Apr 1992
The skeletal Class III malocclusion is characterized by mandibular prognathism, maxillary deficiency, or both.1,2 Such a patient has a retrusive nasomaxillary area and a prominent lower third of the f...
192.
Distalization with a Nance Appliance and Coil Springs
Volume 31 : Number 5 : Page 321 : May 1997
Several articles have been published in recent years showing modifications of the basic Nance appliance1 for correction of Class II cases without the need for patient cooperation.2-6 The present study...
193.
A Miniscrew System with Interchangeable Abutments
Volume 42 : Number 10 : Page 574 : Oct 2008
Orthodontic miniscrews have become increasingly popular in recent years because of their versatility, minimal invasiveness, and low cost.1-6 The effectiveness of conventional miniscrew systems is limi...
194.
A Modified Theroux Phase I Retainer Design
Volume 45 : Number 12 : Page 666 : Dec 2011
Hawley retainers, single-thickness thermoformed retainers, and bonded lingual retainers are all commonly used for Phase I retention. Each appliance has its advantages and drawbacks. Although the Hawle...
195.
CASE REPORT
Nonsurgical Treatment of a Mature Adult Class III Patient
Volume 48 : Number 11 : Page 697 : Nov 2014
Adult orthodontic treatment involves challenging biomechanical considerations, due both to the lack of skeletal growth potential and to age-related changes in biological response. An older patient oft...
196.
Early Management of Impacted Maxillary Incisors with Skeletal Anchorage
Volume 49 : Number 3 : Page 185 : Mar 2015
Maxillary central incisor impaction is relatively uncommon, at a rate of only .06-.2%,1 but can be problematic for the clinician when encountered.2-4 Treatment options include orthodontic eruption of ...
197.
Volume 49 : Number 12 : Page 770 : Dec 2015
The advantages of a rapid maxillary expander (RME) anchored to the deciduous teeth in the mixed dentition have been described in the literature, as has the use of a cast-metal Haas-type RME bonded to six deciduous teeth.[ref]1-4[/ref] If the upper first permanent molar remains impacted against the second deciduous molar, however, the distal root of the deciduous molar may experience early resorption, leaving the permanent molar unable to erupt spontaneously. It then becomes impossible to band the deciduous second molar, especially considering the poorly retentive coronal anatomy of the deciduous teeth. The use of bands could not only increase the risk of appliance failure, but create another obstacle to first-molar eruption. An alternative approach would be to extract the deciduous second molars and expand the permanent teeth, but this could lead to early loss of the leeway space, with the consequent need to regain space by distalizing the upper molars or by using extraoral traction in a second treatment phase, or to wait for full eruption of the first molars. It might also require a transpalatal bar to be used before expansion to correct a buccal molar inclination or molar rotation.
198.
A Digitally Designed and Sinter Laser-Melted Hybrid Hyrax
Volume 54 : Number 6 : Page 336 : Jun 2020
The authors examine the feasibility of producing a fixed functional appliance by fully digital design and manufacturing. A Hybrid Hyrax expander and a surgical guide for palatal miniscrew placement are both three-dimensionally printed in the laboratory from a digital model.
199.
Correction of Upper Midline Deviations with the Mesial-Distalslider
Volume 59 : Number 7 : Page 425 : Jul 2025
Drs. De Felice, Caruso, Drescher, and Wilmes describe the use of the Mesial-Distalslider, which corrects asymmetry by combining the mechanics of the Beneslider and the Mesialslider to simultaneously distalize on one side of the upper arch and mesialize on the other.
200.
Directional Edgewise Orthodontic Approach, Part 2
Volume 8 : Number 12 : Page 679 : Dec 1974
This is the second in a series of articles by Dr. Hickham in which he is presenting the directional edgewise approach in detail and several adjunctive techniques. Part 1 appeared in the November issue...
Showing 181-200 of 524 results. Search completed in 0.116 seconds.