ALIGNER CORNER
Evaluation of Composite Attachment Positions Using Four Indirect Bonding Tray-Sectioning Techniques
Dr. Chen and colleagues measure the deviation of posterior attachments from ideal positions after indirect bonding to 3D-printed models. Template trays were sectioned in four different ways (whole, halves, thirds, and sixths) for testing of bonding accuracy.
This article can only be viewed by JCO subscribers. Subscribers should log in below. You can purchase a subscription to JCO for as little as $223 a year worldwide. You can also purchase access to the entire JCO archive for 1 or 30 days ($30 or $70), or for $10 just this article for one year.
Please log in to your account to proceed. If you do not have an account, please create one.
Need Help?
Dynamic verses Static IP
Please select whether you have a dynamic IP address or a static IP address. A dynamic IP address can change over time while a static IP will never change. You may need to contact your IT administrator to find this out. If you don't have access to this information, you should select the option that you are using a dynamic IP address.
Note: If you do select dynamic IP address, you must have cookies enabled for your browser.
