THE CUTTING EDGE
Impact of Orientation on Dimensional Accuracy of 3D-Printed Orthodontic Models
This study from Short, Drs. Favero, English and Kasper, was designed to evaluate the effect of model orientation in a stereolithographic 3D printer on the dimensional accuracy of the printed models in specific areas. Flat, perpendicular, and angulated orientations are compared in terms of accuracy and cost.
This article can only be viewed by JCO subscribers. Subscribers should log in below. You can purchase a subscription to JCO for as little as $223 a year worldwide. You can also purchase access to the entire JCO archive for 1 or 30 days ($30 or $70), or for $10 just this article for one year.
Please log in to your account to proceed. If you do not have an account, please create one.
Need Help?
Dynamic verses Static IP
Please select whether you have a dynamic IP address or a static IP address. A dynamic IP address can change over time while a static IP will never change. You may need to contact your IT administrator to find this out. If you don't have access to this information, you should select the option that you are using a dynamic IP address.
Note: If you do select dynamic IP address, you must have cookies enabled for your browser.
